Building Backyard Preformed Waterfalls
Your backyard waterfalls synthetic rock waterfalls and streams made to look like real rock using fibreglass resin or polyurethane makes it possible to build your pond waterfalls in minutes and not hours or even days. Take advantage of modular design to provide backyard design variation.
If you have a pond in your backyard or garden it really should have a simple waterfall cascading into the pond. Waterfalls help water circulation and since the water in a pond needs oxygen to keep fish and pond filter bacteria alive circulating water using a suitable submersible pump and letting the water overflow adds oxygen to the pond water. It is an alternative to a pond fountain that sprinkles water to absorb oxygen. In fact most ponds have both a fountain and a waterfall to provide the wonderful sounds and looks desired.
Products like the one shown below are available in the USA from one of the top suppliers in the water gardening industry at great prices. The online supplier is based in Florida
Backyard pond waterfalls should suit the size of the location. Remember not too
high is the right approach for almost all waterfalls. Soothing sound not roaring
torrents is the aim of any cascading. Water and waterfalls remove stress from
every day life.
The rule of thumb for deciding the right flow of water over a waterfall is to deliver between 250 litres per hour (about 70 gph) and 350 litres per hour (say 100 gph). You can actually do a simple water flow test to also determine the right size pump or measure the overflow points..
When you create the flexible piping for connecting the pump to the waterfall inlet make certain that the diameter is as wide as possible and the length as short as possible. Use smooth bends and not right angle fittings to change water flow direction (ideal pipe for bending without kinks is ribbed flexible hose or tubing). Do not include any fittings in pipe run if you can avoid it. All fittings reduce power from pump used t deliver water flow.
Another good tip that will save you money is to consider using 2 pumps for every fish pond. Hard to believe but it's true
Below is an example from a range of fibreglass preformed waterfalls. It is part
of a modular stream or waterfall approach - select one or more sections to
complete a backyard waterfall or a garden pond water fall of your choice.
Building home waterfalls using preformed components has never been so easy.
Backyard preformed waterfalls, pond ideas are now many and varied.
By using soil from the pond excavation you can easily build up waterfall sections like this to make impressive streams and waterfalls running at angle and inclinations to suit your personal taste.
If you want to build your own waterfall from real rocks, and pond liner material like EPDM pond liner then get expert advice. It is difficult to build a waterfall from scratch and you'll waste a lot of time and money by not learning how to do it properly. By far the best low cost practical handbook I've ever seen is written by Peter May. Click this link to learn more best waterfall stream and practical pond building book ever and it costs peanuts too.
Backyard Preformed ponds and Preformed waterfalls summary
Please remember synthetic rock waterfalls as backyard waterfalls are not just a nice to have. They are almost essential for the well being of your koi pond or fish pond.
-
Pond waterfalls add oxygen to water.:
-
Building with preformed backyard waterfalls is now a pleasure instead of a back-breaking hassle.
-
You can now build a backyard waterfall quickly and easily with either fiberglass or polyurethane preformed designs.
Make sure you choose the right sized pump or better still 2 pumps to save even more money.
Running costs for waterfall pumps is important. Here's how to calculate your waterfall pump running cost
GOOD TIP: The best waterfall pond pump pipe you can use is black ribbed piping which when bent forms nice smooth curves and cannot kink or get flattened easily. The fact that it's black will also make it more difficult for pond algae to grow inside the pipe and make a restriction that will reduce pump flow.




